Wybierz inny kraj lub region, aby zobaczyć zawartość dla swojej lokalizacji.
Stany Zjednoczone
06:02:23 GMT+0000 (Coordinated Universal Time)
GIHLK80-DO
Rod end
Hydraulic rod end, with thread clamping device, left hand thread, requiring maintenance, sliding contact surface: steel/steel, open design
Main Dimensions & Performance Data
| Cr | 522.000 N | Basic dynamic load rating, radial |
| C0r | 670.000 N | Basic static load rating, radial |
| d | 80 mm | Bore diameter bearing |
| d2 | 176 mm | Outer eye diameter |
| l4 | 265 mm | Total length internal thread head |
| D | 120 mm | Outside diameter bearing |
| B | 55 mm | Width inner ring |
| ≈m | 14,6 kg | Masa |
Dimensions
| α | 6 ° | Tilt angle |
| C1 | 60 mm | Width of the rod end |
| dK | 105 mm | Ball diameter |
| d3 | M80x2 | Thread size |
| d4 | 105 mm | Shank diameter |
| d5 | 160 mm | Shank diameter, large |
| d 7 | M20x55 | Diameter screw clamp |
| h1 | 170 mm | Shank Length Internal thread head |
| l3 | 80 mm | Thread length Internal thread |
| l7 | 80 mm | Distance drilling with/shaft start |
| dUT | 0 mm | Bore diameter bearing, lower tolerance |
| dT | H7 | Bore diameter bearing, tolerance |
| dOT | 0,03 mm | Bore diameter bearing, upper tolerance |
| BUT | -0,03 mm | Width inner ring, lower tolerance |
| BOT | 0 mm | Width inner ring, upper tolerance |
| MA | 535 Nm | Tightening torque |
| Gr | CN | Radial Clearance |
| Grmin | 0,055 mm | Radial clearance, minimum |
| Grmax | 0,142 mm | Radial clearance, maximum |
Mounting dimensions
| r1smin | 1 mm | Edge Spacing |
| d1 | 89,4 mm | Outer flange diameter inner ring |
Temperature range
| Tmin | -60 °C | Operating temperature min. |
| Tmax | 200 °C | Operating temperature max. |
Pliki do pobrania:
Twoja aktualna wersja produktu
| Clampable | Clampable | |
| Maintenance | Maintenance required | |
| Mounting | Internal thread | |
| Lubrication nipple | DIN71412-AM6 (tapered grease nipple) | |
| Slotted | Slotted, both sides | |
| Thread Pitch | Left-hand thread | |
| Sealing | Without | |
| Radial internal clearance | CN (Group N) | Normal internal clearance |
Właściwości
Przykro nam...
Obecnie nie ma dostępnego pliku CAD dla tego produktu. Jeśli chcesz otrzymać powiadomienie, gdy plik CAD będzie dostępny, zaloguj się lub zarejestruj bezpłatnie.
Ostatnio oglądane produkty
Poczekaj, aby zobaczyć ostatnio oglądane produkty