Wybierz inny kraj lub region, aby zobaczyć zawartość dla swojej lokalizacji.
Stany Zjednoczone
00:15:04 GMT+0000 (Coordinated Universal Time)
MLF52-500-EE-ZR
Linear actuator
Actuators with external track roller guidance system and toothed belt drive.Basic carriage, one driven carriage
Hauptabmessungen und Leistungsdaten
| B1 | 155 mm | Total Width |
| H | 125 mm | Höhe |
| L | 500 mm | Length |
Anschlussmaße
| D86 | 95 mm | |
| D87 | 115 mm | Ø Bolt circle |
| d85 | 20 mm | |
| d86 | 76 mm | Ø Inner Fit |
| L88 | 31 mm | |
| G43 | M12 | Thread |
| G87 | M8 | Thread |
| h85 | 60,6 mm | |
| JB43 | 115 mm | |
| JL43 | 180 mm | Toleranz ±0,2 |
| JL44 | 420 mm | |
| jB8 | 80 mm | |
| NB85 | 6 mm | Width of Keyway |
| NL85 | 25 mm | Length of Keyway |
| NT85 | 3,5 mm | Depth of Keyway |
| T86 | 4 mm | Einpasstiefe |
| Tol T86 up | 0,5 mm | Obere Toleranz |
| Tol T86 low | 0 mm | Untere Toleranz |
| t43 max | 24 mm | Gewindetiefe |
| t87 max | 15 mm |
Abmessungen
| B2 | 112 mm | Width of Support Rail |
| B4 | 111 mm | Width of Return Unit |
| B72 | 2 mm | |
| H1 | 55 mm | |
| H2 | 98,6 mm | Höhe |
| H4 | 118,3 mm | Höhe der Umlenkeinheit |
| H7 | 65,4 mm | |
| h13 | 25 mm | |
| h14 | 50 mm | |
| L2 max | 8.000 mm | Maximum length of Support Rail |
| L4 | 115,5 mm | |
| L6 | 6 mm | Length of Wiper Brushes |
| S | 85 mm | Aufbaumaß |
Technische Daten
| mLAW | 7,47 kg | Mass of Carriage |
| vmax | 8 m/s | Maximum Speed |
| amax | 40 m/s2 | Max. Beschleunigung |
| Rx | 360 mm | |
| Ry | 35,3 mm | |
| Rz | 95 mm | |
| I C | 20.000 N | Load direction I: compressive load |
| I C0 | 10.000 N | Load direction I: compressive load |
| II C | 20.000 N | Load direction II: tensile load |
| II C0 | 10.000 N | Load direction II: tensile load |
| III C | 32.400 N | Load direction III: lateral load |
| III C0 | 18.200 N | Load direction III: lateral load |
| M0x per | 215 Nm | Max. permissible static moment per Carriage 1 |
| M0y per | 3.300 Nm | Max. permissible static moment per Carriage 1 |
| M0z per | 1.800 Nm | Max. permissible static moment per Carriage 1 |
| Iy | 386 cm4 | Flächenträgheitsmomente des Trägerprofils 2 |
| Iz | 301 cm4 | Flächenträgheitsmomente des Trägerprofils 2 |
Zusätzliche Informationen
73,5 Nm | Max. zulässiges Antriebsmoment | |
4 x LFR5302-10-2Z | Track Rollers | |
0,1 mm | Repeat Accurancy ± | |
270 mm | Vorschub | |
32AT10 | Toothed Belt | |
0,2 kg/m | Mass of Toothed Belt | |
1.750 N | Zulässige Riemenbetriebskraft | |
12,6 kg*cm2 | Massenträgheitsmoment Zahnräder |
Temperaturbereich
| Tmin | 0 °C | Minimum operating Temperatur |
| Tmax | 80 °C | Maximum operating Temperatur |
Przypisy
1
The values are single loads and apply when the underside of the actuator is fully supported. If there are several carriage units per actuator or combined loads are present, these must be reduced.
2
Pliki do pobrania:
Twoja aktualna wersja produktu
| Size code | 52 | |
| Length of carriage | 500 | 500 mm |
| Carriage design | EE | Double strengthened carriage |
| Drive type | (3)ZR | Toothed belt drive |
| Additional carriage | / | No additional carriage |
| Support rail design | / | One-piece |
| Bellow | / | No |