Wybierz inny kraj lub region, aby zobaczyć zawartość dla swojej lokalizacji.
Stany Zjednoczone
Witamy w medias - stronie partnerskiej firmy HEDAN Sp. z o.o.
Zapisz jako preferowanego partnera handlowego
Zarejestruj się w medias Plus, dodaj produkty do koszyka i wysyłaj zapytania do partnerów handlowych
17:15:25 GMT+0000 (Coordinated Universal Time)
ZARF30105-TV
Needle roller/axial cylindrical roller bearing
Needle roller/axial cylindrical roller bearings ZARF, double direction, for screw mounting
Informacje o produkcie
Main Dimensions & Performance Data
| d | 30 mm | Bore diameter |
| D | 105 mm | Outside diameter |
| H | 66 mm | Hight |
| Ca | 107.000 N | Basic dynamic load rating, axial |
| C0a | 265.000 N | Basic static load rating, axial |
| Cr | 26.000 N | Basic dynamic load rating, radial |
| C0r | 47.000 N | Basic static load rating, radial |
| Cua | 22.900 N | Fatigue load limit, axial |
| Cur | 6.800 N | Fatigue load limit, radial |
| nG Oil | 4.400 1/min | Limiting speed for oil lubrication |
| nG Grease | 1.300 1/min | Limiting speed for grease lubrication |
| MRL | 2,1 Nm | Bearing friction torque |
| ≈m | 1,81 kg | Masa |
Mounting dimensions
| Da max | 69 mm | Maximum diameter of housing shoulder |
| da min | 52 mm | Minimum diameter shaft shoulder |
| t1 | 0,2 mm | Position bore in the housing |
Dimensions
| H1 | 41 mm | Height outer ring over wave washer |
| C | 18 mm | Width, outer ring |
| C1 | 10 mm | Distance to lubrication hole |
| D1 | 68 mm | Rip diameter shaft washer |
| B | 14 mm | Width, inner ring |
| rmin | 0,3 mm | Minimum chamfer dimension |
| r1 min | 0,6 mm | Minimum chamfer dimension |
| d1 | 3,2 mm | Diameter lubrication hole |
| J | 85 mm | Pitch circle diameter (holes) |
| n | 12 | Number of screwing holes |
| n x t | 30 ° | Split |
Temperature range
| Tmin | -30 °C | Operating temperature min. |
| Tmax | 120 °C | Operating temperature max. |
Additional information
| caL | 3.300 N/µm | Rigidity axial |
| ckL | 1.100 Nm/mrad | Tilting stiffness |
| Mm | 6,53 kg*cm2 | Mass moment of inertia |
1 µm | Axial runout | |
| radial | ZMA30/65 | Recommended INA precision locknut for radial locking (not included) |
| axial | AM30 | Recommended INA precision locknut for axial locking (not included) |
| MA | 75 Nm | Tightening torque nut |
24.287 N | Required locknut force | |
M8 | Screw size | |
| na | 12 | Number of screws |
| na x ta | 30 ° | Division (screwing holes) |
Pliki do pobrania:
Twoja aktualna wersja produktu
| Cage | TV | Plastic Cage made from PA66 |
Właściwości
