Select a different country or region to see content for your location.
United States
11:02:39 GMT+0000 (Coordinated Universal Time)


MLF32-155-ZR
Linear actuator
Actuators with external track roller guidance system and toothed belt drive.Basic carriage, one driven carriage







Main Dimensions & Performance Data
B1 | 86 mm | Gesamtbreite |
H | 82 mm | Höhe |
L | 155 mm | Länge |
≈m | 9,22 kg/m | Weight |
Mounting dimensions
D86 | 70 mm | |
D87 | 80 mm | Ø Bolt circle |
d85 | 20 mm | |
d86 | 61 mm | Ø Innerer Einpass |
L88 | 25 mm | |
G43 | M8 | Gewinde |
G87 | M6 | Gewinde |
h85 | 41,5 mm | |
JB43 | 59 mm | |
JL43 | 100 mm | Toleranz ±0,2 |
jB8 | 43 mm | |
NB85 | 6 mm | Width of Keyway |
NL85 | 16 mm | Length of Keyway |
NT85 | 3,5 mm | Depth of Keyway |
T86 | 2,3 mm | Depth Fit |
Tol T86 up | 0,3 mm | Upper tolerance |
Tol T86 low | 0 mm | Lower tolerance |
t43 max | 14 mm | Depth of Thread |
t87 max | 12 mm |
Dimensions
B2 | 75 mm | Breite der Tragschiene |
B4 | 74 mm | Breite der Umlenkeinheit |
B72 | 2 mm | |
H1 | 32 mm | |
H2 | 66,5 mm | Höhe |
H4 | 81,5 mm | Höhe der Umlenkeinheit |
H7 | 47 mm | |
h13 | 25 mm | |
L2 max | 8.000 mm | Maximale Länge der Tragschiene |
L4 | 80 mm | |
L6 | 6 mm | Länge der Abstreifbürsten |
S | 85 mm | Dimension |
Technical data
mLAW | 0,73 kg | Masse des Laufwagens |
vmax | 8 m/s | Max. Geschwindigkeit |
amax | 40 m/s2 | Maximum Acceleration |
Rx | 60 mm | |
Ry | 20,5 mm | |
Rz | 54 mm | |
I C | 4.100 N | Lastrichtung I: Druckbelastung |
I C0 | 2.400 N | Lastrichtung I: Druckbelastung |
II C | 4.100 N | Lastrichtung II: Zugbelastung |
II C0 | 2.400 N | Lastrichtung II: Zugbelastung |
III C | 6.600 N | Lastrichtung III: Seitenbelastung |
III C0 | 4.200 N | Lastrichtung III: Seitenbelastung |
M0x per | 30 Nm | Maximal zulässige statische Momente je Laufwagen 1 |
M0y per | 130 Nm | Maximal zulässige statische Momente je Laufwagen 1 |
M0z per | 70 Nm | Maximal zulässige statische Momente je Laufwagen 1 |
Iy | 104 cm4 | Flächenträgheitsmomente des Trägerprofils 2 |
Iz | 76 cm4 | Flächenträgheitsmomente des Trägerprofils 2 |
Additional information
18 Nm | Max. zulässiges Antriebsmoment | |
4 x LFR50/8-6-2Z | Laufrollen | |
0,1 mm | Wiederholgenauigkeit ± | |
175 mm | Vorschub | |
20AT5 | Zahnriemen | |
0,068 kg/m | Masse des Zahnriemens | |
640 N | Zulässige Riemenbetriebskraft | |
2,2 kg*cm2 | Massenträgheitsmoment Zahnräder |
Temperature range
Tmin | 0 °C | Min. Betriebstemperatur |
Tmax | 80 °C | Max. Betriebstemperatur |
Footnotes
1
The values are single loads and apply when the underside of the actuator is fully supported. If there are several carriage units per actuator or combined loads are present, these must be reduced.
2
Moment of inertia of area of “closed” support rail (= support rail without free milled area on base). In comparison with these values, the moment of inertia of area Iy of the side with the free milled area on the base is reduced to an insignificant degree and the moment of inertia of area Iz is reduced by approx. 10%.
Downloads:
Your current product variant
Size code | 32 | |
Length of carriage | 155 | 155 mm |
Carriage design | / | Standard carriage |
Drive type | (3)ZR | Toothed belt drive |
Additional carriage | / | No additional carriage |
Support rail design | / | One-piece |
Bellow | / | No |

