Wählen Sie ein anderes Land oder eine andere Region aus, um Inhalte für Ihren Standort anzuzeigen.
Vereinigte Staaten von Amerika
12:23:55 GMT+0000 (Coordinated Universal Time)


LTP15-275-2010-F-0
Linear table
Präzisions-Lineartische mit Profilschienenführung und Kugelgewindetrieb. Aluminiumausführung, mit Einzelmutter, ohne Faltenbalg.








n.r.
F | Spindelmutterausführung |
Hauptabmessungen und Leistungsdaten
B4 | 275 mm | Total Width |
H | 75 mm | Gesamthöhe |
L | 275 mm | Length of Carriage |
Anschlussmaße
b82 | 65 mm | |
b87 | 80 mm | |
D8 | 9 mm | |
d85 | 11 mm | |
d86 | 60 mm | Tolerance -0,01 |
G43 | M8x16 | Thread |
G87 | M6 | Thread |
h85 | 40 mm | |
h87 | 33 mm | Toleranz ±0,2 |
jB43 | 140 mm | |
jL43 | 70 mm | |
jB44 | 252 mm | |
jB8 | 160 mm | |
jB9 | 250 mm | |
jL44 | 210 mm | |
jL8 | 60 mm | 1 |
L85 | 23 mm | |
L86 | 8 mm | |
L88 | 42 mm | |
S8 | 15 mm | |
T8 | 11 mm | |
t43 | 16 mm | Gewindetiefe |
t87 | 15 mm | Gewindetiefe |
Abmessungen
H1 | 40,5 mm | Height of Carriage |
H2 | 34 mm | Height of Support Rail |
H4 | 74,5 mm | Höhe des Lagergehäuses |
H5 | 74,5 mm | Höhe des Lagergehäuses |
h82 | 31 mm | |
L4 | 35 mm | Length of Bearing Housing with Drive System |
L5 | 25 mm | Länge des Lagergehäuses ohne Antrieb |
Technische Daten
Rx | 198 mm | |
Ry | 35 mm | |
Rz | 206 mm | |
S | 10 mm | Sicherheitsabstand |
mLAW | 6,4 kg | Mass of Carriage |
vmax | 0,5 m/s | Maximum Speed |
amax | 20 m/s2 | Max. Beschleunigung |
CI | 19.000 N | Load Direction I: Compressive Load |
C0 I | 58.000 N | Load Direction I: Compressive Load |
CII | 19.000 N | Load Direction II: Tensile Load |
C0 II | 58.000 N | Load Direction II: Tensile Load |
CIII | 19.000 N | Load Direction III: Lateral Load |
C0 III | 58.000 N | Load Direction III: Lateral Load |
M0x per | 5.650 Nm | Max. permissible static moment per Carriage 2 |
M0y per | 4.100 Nm | Max. permissible static moment per Carriage 2 |
M0z per | 4.100 Nm | Max. permissible static moment per Carriage 2 |
d0 | 20 mm | Spindeldurchmesser |
P | 10 mm | Spindle Pitch |
C | 12.700 N | Dynamic load rating 3 |
C0 | 22.100 N | Basic static load capacity 3 |
Ca | 17.900 N | Load capacity fixed Spindle bearing dyn |
C0a | 28.000 N | Load capacity fixed Spindle bearing stat |
Zusätzliche Informationen
15 Nm | Max. zulässiges Antriebsmoment | |
2 x KUVE15-B-H | Führungswagen | |
ZKLF1560.2RS | Rolling Bearings (locating bearing) | |
0,05 mm | Repeat accuracy ± | |
0,85 kg*cm2 | Mass moment of inertia of threaded Spindle |
Temperaturbereich
0 °C | Minimum operating Temperatur | |
80 °C | Maximum operating Temperatur |
Fußnoten
1
Location of high precision linear tables: High precision linear tables are supplied as standard with a symmetrical hole pattern. With a symmetrical hole pattern, aL = aR.
2
The values are single loads and apply when the underside of the table is fully supported. These must be reduced for combined loads.
3
Basic load ratings in accordance with DIN 69051. Due to the modified calculation algorithms in DIN 69051, the basic load ratings Ca and C0 may differ in comparison with older data.
Downloads:
Ihre aktuelle Produktvariante
Grössenkennziffer | 15 | |
Antriebssystem | KGT | Kugelgewindetrieb |
Laufwagenlänge | 275 | 275 mm |
Spindeldurchmesser | 20 | |
Spindelsteigung | 10 | 10 mm |
Faltenbalg | 0 | Nein |

